Difference between revisions of "Cooperative Data Reconstruction"
m (→Telemetry Format)
(→Generative Poetry（Baudot code）)
|Line 103:||Line 103:|
[[File:CPformat.png|800px|thumb|none|Structure of generative poetry]]
[[File:CPformat.png|800px|thumb|none|Structure of generative poetry]]
4 units, CP2, CP3, CP4, and CP5, shown as red parts in the figure above,
4 units, CP2, CP3, CP4, and CP5, shown as red parts in the figure above, the generative poetry.
CP2 and CP3 carry temperatures of the spacecraft represented in the "color-code."
CP2 and CP3 carry temperatures of the spacecraft represented in the "color-code."
Revision as of 02:18, 19 November 2014
As a main mission of DESPATCH, we are conducting an experiment in cooperative diversity communication. In the experiment, we attempt to collect signals from the spacecraft received not only at our own radio station in Tokyo, but at many ham radio stations around the world to reconstruct them back into the original data from the spacecraft. In this page, the details of the experiment and how to join it are explained.
Reception of such weak signals to reconstruct data from the spacecraft will require the expertise of exceptionally skilled ham operators. We are hereby providing a rare opportunity to receive radio signals transmitted by a spacecraft in deep space, and ask for your cooperation in this project.
DESPATCH design, subsystems, and trajectory are detailed in the Main Page.
- 1 Mission Overview
- 2 Mission Planning
- 3 Telemetry Format
- 4 Reception Report
- 5 What is needed to receive DESPATCH?
- 6 Links
- 7 Contact
"ARTSAT2: DESPATCH" is the second mission of the ARTSAT project. This spacecraft, 50x50x45 cm in size with a mass of 32 kg has a helix-shaped segment making it a beautiful sculpture. DESPATCH will be launched into an Earth escape trajectory at November 30, 2014 13:24:48, JST (UTC+9) and moves away from Earth soon after launch. The simulation shows that it reaches lunar distance (385,000 km) from Earth within 24 hours of separation from the launcher.
The spacecraft, carrying a CW beacon in the 430MHz band, will transmit the "generative poetry" created in deep space for only a week until it reaches a distance of 2.5 million km from Earth. However, the signals from DESPATCH are very weak and will be fading, because the spacecraft has no attitude control system and uses only a low-directivity antenna.
The ARTSAT project asks that you attempt reception of these very weak signals at your radio stations. As a main mission of DESPATCH, we are conducting an experiment in cooperative diversity communication. In the experiment, we hope to collect signals from the spacecraft received not only at our own radio station in Tokyo, but at many ham radio stations around the world. The design is to have transmissions decoded by volunteer ham-radio operators throughout the world forwarded to our data server via the Internet for reconstruction back into the original poetry from the spacecraft. With this experiment, we would like to verify the practical effectiveness of cooperative diversity communication.
DESPATCH is going to be launched at November 30, 2014 13:24:48, JST (UTC+9) along with the Hayabusa-2 asteroid probe, and injected into an earth escape trajectory about 2 hours later.
The spacecraft, carrying a CW beacon in the 430MHz band, will transmit the signals for only a week until it reaches a distance of 2.5 million km from Earth. We are hoping to receive three types of data — the generative poetry, housekeeping data, and a simple beacon. Accordingly, we have divided the 1 week mission period into three phases based on the spacecraft’s distance from Earth, as shown in the table below. In each of these phases, a different type of data will be transmitted by the spacecraft.
|Phase||Distance from Earth||Type of data received on Earth|
|Phase1||~ 170,000 km||Housekeeping data in Morse code|
|Phase2||170,000 ~ 1,600,000 km||Generative poetry in Baudot code|
|Phase3||1,600,000 km ~||Spacecraft temperature in a simple beacon|
The phase changes are shown in the figure below — the colors representing each phase. The visibility times in five cities — Tokyo, Sydney, Berlin, Boston, and Buenos Aires — are shown in the figure as black bars. Please note that the times in the figure are expressed in Coordinated Universal Time (UTC).
We conduct the experiment for the cooperative diversity communication only in the phase 2, but we also appreciate your helps and reception reports in phase 1 or phase 3. The phase 2 runs for almost 100 hours as shown in the figure.
All of the signals from DESPATCH are transmitted by a CW transmitter in the 430MHz band. The signals with 7W power are radiated from a monopole antenna.
As mentioned above, the mission period is divided into 3 phases and different kind of data are received in each phase on Earth. Herein, the format of the data in each phase is explained.
In Phase 1, housekeeping data encoded in Morse, whose speed is 6 WPM, is received on Earth. This data is used to monitor the health of the spacecraft mainly at our own station in Tokyo. For this reason, this phase ends at the middle of the first visibility period in Tokyo. This signal carrying housekeeping data, repeats 4 sentences named AS0, AS1, AS2, and AS4. There are 10 second intervals, in which the transmission is off, between the sentences. The data format of the housekeeping data is described in the file below.
Generative Poetry（Baudot code）
Phase 2 is where we conduct our experiment on cooperative diversity communication. In this phase, Baudot-encoded generative poetry will be transmitted for reception around the world. Reception will be limited to noisy and intermittent signals given the considerable distance between the spacecraft and Earth. We expect it will be difficult (in some cases, impossible) for any lone ham operator to decode and interpret the signals.
As such, we are attempting to gather all bit strings, received and decoded by ham operators around the world through the Internet so the bit strings can be patched together to reconstruct the original poetry. The figure below shows the reconstruction process. In the figure, the word “DESPATCH” is reconstructed from data acquired by five ham operators. Note that the red letters are those that were rejected by majority vote.
Format of generative poetry
The signal, carrying the generative poetry, repeats 8 units named CP0, CP1, ..., CP7. Every unit has a header in 5 bits, a footer in 5 bits, and 40 bits between them, and they are encoded in the Baudot code. Since the Baudot code represents a character in 5 bits, every unit has the header in 1 character, the footer in 1 character, and 8 characters between them, in the Baudot code. But only the 40 bits in CP0, a blue part shown in the figure below, is not encoded and carries raw bits of some sensor readings.
4 units, CP2, CP3, CP4, and CP5, shown as red parts in the figure above, carries the generative poetry.
CP2 and CP3 carry temperatures of the spacecraft represented in the "color-code." This color-code represents the color in 4 characters, e.g., the white is represented as "WHIT." The higher the temperature is, the brighter color is received on Earth, as if we saw the spacecraft through a thermal imaging camera. The rule to convert the color-code to the temperature is described in the xls file below.
CP4 and CP5 carry the consumption current and 3-axis angular velocities represented in the "rhythm phrase." This rhythm-phrase is a goup of phrases picked up from "Gadji beri bimba," a poem writted by Hugo Ball, and it is used in a song, "I Zimbra." That is, this rhythm-phrase plays a kind of the acoustic poetry generated from sensor readings. The rule to convert the rhythm-phrase to the current or the angular velocity is described in the xls file below.
Signal speed and encoding
The speed of the signal carrying the poetry is 1 bps. Since the size of every unit (CP0, CP1, ..., and CP7) is 50 bits, it takes 50 seconds to transmit each of units. Because there are 10 second intervals between them, it takes (8×(10+50) sec. =）8 min. to transmit from CP0 through CP7.
Please note that the Manchester code is used for encoding. Although the signal speed is 1 bps, the on/off of the CW can switch every 0.5 second in the shortest since the Manchester code encodes each of the binary states "1" and "0" as a rising edge (CW off→on) and a falling edge (CW on→off). For example, the signal carrying CP0 is something like the "Received Signal" in the figure below.
The file below is MP3 sound data which is converted from the signal carrying CP0 (CW on: no sound, CW off: sound in 440Hz).
Spacecraft temperature (Simple beacon)
Phase 3 is the reception of a radio beacon whose period cycle is 3 seconds and duty-ratio changes depending on temperature of the spacecraft batteries (T = 0x00~0xFF), as shown in the figure below. Spacecraft temperatures can be derived by simply detecting periodic changes in the faint signal.
As mentioned above, the mission period is divided into 3 phases. Herein, how to report the data you received in each phase is explained. Reception report is received at the web page below in every phase.
Please enter the strings decoded from the morse signal in the "Comment" form. Or, please upload the text file in which the decoded strings are written.
In the experiment on the cooperative diversity communication approach, we are attempting to gather all bit strings, received and decoded by ham operators around the world, and synchronize them for reconstruction back into the original poetry from the spacecraft. For this reason, we are asking every operator to send us not only the decoded bit strings but timestamps, which will tell us when each bit was received.
There are 3 types of methods to report the poetry with the timestamp.
1. Use the special forms
You can use the special forms, "Received Data and Frequency with Time stamp," in the reception report page to report the data (bit strings) with timestamps.
For examples, if you began to receive the signal carrying CP0 (like the "Received Signal" in the figure below) at November 30, 2014, 20:00:33 JST (GMT+9:00), you should enter "11/30/2014 20:00:33 +0900" in the left form ("Date" form) and "1,1,1,1,1,0,1,0,1,1,1,0,1,1,1,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,0,0,0,1,0,1,1,0,0,0,1,1,0,0,0,0,0,0,0" in the right form ("Data" form). The center form ("Frequency" form) may be omitted although there are additional explanations about it below of this section.
To report using these forms, please note the following things:
- You should not report the CW state (on/off), but rather the bit strings decoded from CW state based on the Manchester encoding (NOT the "Received Signal", but rather the "Binary," in the figure below)
- The strings should be split by commas (",") at each character ("0" or "1")
- If you cannot decide "0" or "1," replace it with a hyphen ("-")
- The timestamp should be specified as a moment when the first bit was received
And, using the "Add a row" button, you can report multiple bit strings received at different moments at once.
2. Upload a text file
You can upload a text file in which bit strings and timestamps are written in the reception report page. Points to note are the same as what are mentioned above, but you should use the UTC as the time standard of timestamps and write like this: "yyyy.MM.dd hh:mm:ss"
For examples, if you began to receive the signal carrying CP0 (like the "Received Signal" in the figure above) at November 30, 2014, 11:00:33 UTC, you should write the text below in a text file you want to upload.
2014.11.30 11:00:33, 1,1,1,1,1,0,1,0,1,1,1,0,1,1,1,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,0,0,0,1,0,1,1,0,0,0,1,1,0,0,0,0,0,0,0
And, if you want to report multiple bit strings received at different moments at once, you can add new lines in the text file.
3. Upload a sound file
You can upload a sound file which records the signal in the reception report page. In this case, you should enter the time when the recording started in the "Comment" form. You should use the UTC as the time standard of the time and write like this: "yyyy.MM.dd hh:mm:ss"
Please access the reception report page and enter the strength and duty of the signal in the "Comment" form.
As a sub mission of DESPATCH, we are going to determine the spacecraft's orbit using the reception frequency reported by operators around the world. Since the degree of the Doppler effect changes depending on the spacecraft's position and velocity (i.e., the orbit), measurements of the Doppler frequency enable us to improve the orbit. We use the Kalman filter for the orbit determination, which has a state vector composed of spacecraft's position and velocity, and update the state vector using measurements of the Doppler frequency.
For this mission, we are asking every operator to report the reception frequency with a timestamp. To report, you can use the special forms ("Received Data and Frequency with Time stamp") in the reception report page. Please notice the following things when you report:
- You should write the frequency down to hundred's digit in Hz (e.g., 435325500)
- You should specify the received date down to minute's place (e.g., 11/30/2014 21:21:00 +0900)
You can report the reception frequency even if the "Data" form is blank.
The updated orbit will be used for more accurate tracking. A simulation shows that this orbit determination especially improves the prediction accuracy of the reception frequency as shown in the figure below. The more measurements are done, the more accurate the prediction is.
What is needed to receive DESPATCH?
Equipments for reception
First of all, a receiver with CW mode is needed since DESPATCH transmits on 437.325MHz CW.
Next, you need an antenna that is orientable in azimuth and elevation like in the picture below. The receiving margin at every radio station will continue to decrease after the launch as the spacecraft moves away from Earth. We calculated when the receiving margin will dip below zero for receiving antennas of different gains. The result is shown in the figure below. The graph takes time after separation from the rocket as the horizontal axis. The receiving antenna gain whose receiving margin is zero at each point (we call this gain “required receiving-antenna gain”) is taken as the vertical axis. This graph shows that you can receive signals only in periods during which the gain of your receiving antenna is higher than the curves in the graph.
The communication system and link calculation of DESPATCH is detailed in the page below.
Finally, a PC whose system time is correctly adjusted is needed to process the data you received. As mentioned above, in the phase 2, we will attempt to gather all data received around the world, and synchronize them for reconstruction back into the original poetry from the spacecraft. To make this process done correctly, the error of the system time should be less than 0.5 second, considering the on/off of the CW can switch every 0.5 second in the shortest. For this reason, you should adjust the system time in some way, e.g., by connecting the PC to the Internet and setting the NTP (Network Time Protocol) correctly.
Since Despatch is injected into an earth escape trajectory, TLE is unavailable. Instead, we opened a web-page for the spacecraft tracking (both antenna-pointing and receiver-tuning).
Please go to the page and enter your geographic location, and you will get nearby passes and a table with 1 minute steps that gives you AZ, EL, Freaquency, and so on. As the apparent movement and the change of the Doppler shift are slow, manual pointing of the antenna and tuning of the receiver every 10 minutes or so will do.
Or, you can get the same information on the applications you developed using ARTSAT API.
The receiver is to be tuned to the frequency of DESPATCH (437.325MHz) +/- the Doppler shift and your receiver’s frequency error. The Doppler changes very slowly and is mainly due to the rotation of Earth. In the tracking page above, you can pick up the reception frequency every 1 minute.
The degree of the Doppler shift depends on your latitude. The following figure gives the expected doppler frequency changes around Tokyo, Japan.